All naphthalene formaldehyde condensate wholesalers & naphthalene formaldehyde condensate manufacturers come from members. We doesn't provide naphthalene formaldehyde condensate products or service, please contact them directly and verify their companies info carefully.
Total 69 products from naphthalene formaldehyde condensate Manufactures & Suppliers |
|
Brand Name:Haminol Model Number:325 Place of Origin:China Haminol 325 is highly reactive and has a high tendency towards self-condensation providing films with good hardness Corporate Innovation Now, Jianfeng Haokang has finish the research and development of many new products and technologies, carried out a ... |
Chongqing Jianfeng Haokang Chemical Co., Ltd.
Chongqing |
Brand Name:MEMBRAPOR Model Number:CH2O/C-10 ...Formaldehyde Gas Sensor Highly Sensitive CH2O Measurement Applications • Continuous Air Quality Monitoring • Safety and Environmental Control Specification Sheet Rec. Load Resistor 10 - 33 Ω Bias (V_Sens-V_Ref) not recommended Relative Humidity Range 15 % to 90 % RH non-condensing... |
ShenzhenYijiajie Electronic Co., Ltd.
|
Brand Name:HONINGLITE Model Number:F3620-2 Place of Origin:CHINA ... catalyst. This produces a thermoplastic resin. To cure this resin, a hardening agent is used, HMTA (or hexa). Under heat and pressure, it yields ammonia and formaldehyde as methylene groups to cure the resin, hence the term “two |
Jiaxing Honing Import&Export CO,.LTD
Zhejiang |
Place of Origin:China Brand Name:SKYLINE Model Number:1 m³ Formaldehyde Test Chamber ...Formaldehyde Test Chamber Characteristics 1. Inner material: SUS304 mirror stainless steel, smooth surface without adsorption formaldehyde and condensation; Door seal materials is silicon rubber which will not release formaldehyde , good insulation and sealing performance. 2. Temperature and humidity control: Dew point method which will not condensate... |
Skyline Instruments Co.,LTD
Guangdong |
Brand Name:OEM Model Number:01 Place of Origin:CHINA ...Formaldehyde Sensor Product Description * Input: AC85-250V 50Hz-60Hz * Working voltage and current: 5VDC130mA * Warm-up Time: about 200 seconds * Working Temperature: -10 ℃ ~ 50 ℃ * Humidity: < 95% RH (no condensation) * Installation: Wall * Dimensions: D130 * H30mm * With USB interface, and OLED display * Display: Temperature, Humidity, Formaldehyde, Air Quality Item: Temperature, Humidity, Formaldehyd |
Hangzhou Linkwin Smart Technology Co.,Ltd
Zhejiang |
Environmental Chamber Wood Products VOC Analyzer VOC Emission Test Machine VOC Emission Test ChamberBrand Name:BOTO Place of Origin:China Model Number:BT-HUD-F801-3 ... inner chamber is made of stainless steel, the surface is smooth and no condensation, adsorption formaldehyde, guarantee the accuracy. The thermostat box is made of hard foaming material. The door is sealed with silicone rubber, and it’s good ... |
BOTO GROUP LTD
Shanghai |
Place of Origin:CHINA Brand Name:WDF FLEX Model Number:3/8" ... the kingflex insulation effectively retard heat flow and prevent condensation. The environmental friendly materials are manufactured without the use of CFCS,HFCS, HCFCS. They are also formaldehyde free, low VOCS, fiber free, dust free and resistant to |
JIA XING WDF FLEX INSULATION
Zhejiang |
Brand Name:Fenteng Model Number:MR0307 Place of Origin:China(mainland) ...resin is a thermosetting resin by condensation of amino compounds and formaldehyde. It is customary to refer to melamine formaldehyde resin and urea formaldehyde resin as amino resin. FENTENG MR307 provides enhanced film smoothing agents which exhibit very |
Fenteng Fine Chem Tech(Foshan) Co.,Ltd
Guangdong |
Brand Name:Haminol Model Number:325 Place of Origin:China Haminol 325 is highly reactive and has a high tendency towards self-condensation providing films with good hardness Corporate Innovation Now, Jianfeng Haokang has finish the research and development of many new products and technologies, carried out a ... |
Chongqing Jianfeng Haokang Chemical Co., Ltd.
Chongqing |
Brand Name:ES4-CH4S-100 Place of Origin:HongKong ...Formaldehyde Gas Sensor Short Warm Up Time Quick response • Low noise • No electrolyte leakage • Low cost for high volume • Extremely linear response at high concentrations • Individual calibration including test report Datasheet: Lower Detectable Limit (LDL) ≤ 1 ppm Resolution (16Bit ADC) 0.1 ppm Maximum overload 200 ppm Linear range 100 ppm Temperature Range -40 to 50 °C Humidity Range (non condensing... |
ShenzhenYijiajie Electronic Co., Ltd.
|
Brand Name:Haminol Model Number:325 Place of Origin:China Haminol 325 is highly reactive and has a high tendency towards self-condensation providing films with good hardness Corporate Innovation Haminol 325 is highly reactive and has a high tendency towards self-condensation providing films with good hardness Now... |
Chongqing Jianfeng Haokang Chemical Co., Ltd.
Chongqing |
Brand Name:HONINGLITE Model Number:J powder Place of Origin:CHINA ... to formaldehyde in the presence of an acid catalyst. This produces a thermoplastic resin. To cure this resin, a hardening agent is used, HMTA (or hexa). Under heat and pressure, it yields ammonia and formaldehyde as methylene groups to cure the resin, |
Jiaxing Honing Import&Export CO,.LTD
Zhejiang |
Brand Name:HONINGLITE Model Number:H501J Place of Origin:CHINA ...Formaldehyde Resin with Hexamine for Thin Cut off Wheels Product description ♦Appearance: Powder ♦Resin Type: Novolac ♦Resin Monomer: Phenol and Formaldehyde ♦ Catalyst: Acid ♦Curing Agent content: Hexamine Phenol Formaldehyde Resin H501J is produced by condensing a molar excess of phenol to formaldehyde... |
Jiaxing Honing Import&Export CO,.LTD
Zhejiang |
Brand Name:HONINGLITE Model Number:F2328 Place of Origin:CHINA ... content: Hexamine Phenol Formaldehyde Resin F2328 is produced by condensing a molar excess of phenol to formaldehyde in the presence of an acid catalyst. This produces a thermoplastic resin. To cure this resin, a hardening agent is used, HMTA (or hexa). |
Jiaxing Honing Import&Export CO,.LTD
Zhejiang |
Brand Name:HONINGLITE Model Number:F3620-1 Place of Origin:CHINA ... catalyst. This produces a thermoplastic resin. To cure this resin, a hardening agent is used, HMTA (or hexa). Under heat and pressure, it yields ammonia and formaldehyde as methylene groups to cure the resin, hence the |
Jiaxing Honing Import&Export CO,.LTD
Zhejiang |
Brand Name:HONINGLITE Model Number:F8164 Place of Origin:CHINA ...Formaldehyde Resin with Good Fiber Adhesion for Felt Bonding Product Description Phenol Formaldehyde Resin F8164 is produced by condensing a molar excess of phenol to formaldehyde in the presence of an acid catalyst. This produces a thermoplastic resin. To cure this resin, a hardening agent is used, HMTA (or hexa). Under heat and pressure, it yields ammonia and formaldehyde... |
Jiaxing Honing Import&Export CO,.LTD
Zhejiang |
Brand Name:HONINGLITE Model Number:F8163 Place of Origin:CHINA ... catalyst. This produces a thermoplastic resin. To cure this resin, a hardening agent is used, HMTA (or hexa). Under heat and pressure, it yields ammonia and formaldehyde as methylene groups to cure the resin, hence the |
Jiaxing Honing Import&Export CO,.LTD
Zhejiang |
Brand Name:HONINGLITE Model Number:F3620-4 Place of Origin:CHINA ... catalyst. This produces a thermoplastic resin. To cure this resin, a hardening agent is used, HMTA (or hexa). Under heat and pressure, it yields ammonia and formaldehyde as methylene groups to cure the resin, hence the term “two |
Jiaxing Honing Import&Export CO,.LTD
Zhejiang |
Brand Name:HONINGLITE Model Number:F2143 Place of Origin:CHINA ...Formaldehyde Resin Good Solubility for Clutch Facings Product description Powdered Phenol Formaldehyde Resin F2123-2 is produced by condensing a molar excess of phenol to formaldehyde in the presence of an acid catalyst. This produces a thermoplastic resin. To cure this resin, a hardening agent is used, HMTA (or hexa). Under heat and pressure, it yields ammonia and formaldehyde... |
Jiaxing Honing Import&Export CO,.LTD
Zhejiang |
Brand Name:HONINGLITE Model Number:F6443 Place of Origin:CHINA ... catalyst. This produces a thermoplastic resin. To cure this resin, a hardening agent is used, HMTA (or hexa). Under heat and pressure, it yields ammonia and formaldehyde as methylene groups to cure the resin, hence the term “two-step, |
Jiaxing Honing Import&Export CO,.LTD
Zhejiang |