Pen-E-Sheen will slightly darken and highlight the character and beauty of Concrete and
porous natural stone tile or pavers.
Pen-E-Sheen leaves a visible highlight sheen without altering the surface
characteristics and provides excellent water and stain protection.
Pen-E-Sheen is designed to replace Pen-E-Guard when a visible seal is required.
The colour change is slight, if a greater change is required use SSEnhancer
Waterbased Low voc and no toxic fumes.
Fast application withcoats 5-20min apart.
Ideal for around pool areas.
Enables easier removal of dirt, grease, chewing gum, wine, coffee,
Eliminates the occurrence of Efflorescence.
Reduces Moss, mould and algae growth.
Reduces corrosion attack on steel reinforcing.
Breathable, allows water vapour to escape.
Salt barrier, ideal around saltwater pools or marinas.
Penetrating Sealer will last up to 10 years or longer dependant on
application and weather conditions.
Approx coverage m2 per litre
Pictures of colours are for illustrative purposes only.
Colours may vary from how they appear on our website and should be
taken as a guide only.
Surface to be treated should be clean but can be damp.
Apply Penesheen liberally by spray, lambs wool applicator, roller or brush.
Give whole surface a wet” look.
Leave for 5-20 minutes then reapply a second coat whilst still wet.
Wipe of excess sealer on top with a clean cloth after 5mins.
Allow to dry, water repellency will be evident immediately the
surface appears dry, full curing will take 24 hours.
If a more enhanced or wet look is desired SS Enhancer should be used.