Efficient decolorizing flocculant type A
Introduction to the
Efficient decolorizing flocculant is a kind of set of decoloring,
flocculation and removal of COD is equal to a whole new kind of
quaternary ammonium type organic high polymer flocculant, molecular
formula (C4H8N5X) n. The decolorizing effects significantly (95%
removal), and also has higher for COD, SS, BOD removal rate.
Range of application
Efficient decolorizing flocculant is mainly used in the dye factory
high colority decolorization of wastewater treatment, suitable for
reactive, disperse dye and acid soluble dyes wastewater treatment.
Can also be used in textile, chemical, coking, papermaking,
printing and dyeing, dye, leather, urban sewage, industrial
wastewater decolorization of wastewater treatment station etc. But
instead of floating water, activated carbon, polyacrylamide, etc.
Also can be used as a papermaking using reinforcing agent, sizing
1. The high-efficiency decolorizing flocculant easy to dissolve in
water, can form more nuclear complex make water colloid particles,
particles suspended matter grew up together, form a large volume,
high density, fast settling flocculation body.
2. In water treatment, efficient decolorizing flocculant for the
applicable range of the PH value of the raw water (PH7.5 ~ 10), the
most suitable for alkalescence.
3. Efficient decolorizing flocculant non-corrosive effect of
pipeline equipment, sewage chroma, high removal rate of SS, COD,
BOD, the treated wastewater can meet the national discharge
standard, and can provide the factory water reuse.
4. Efficient decolorizing flocculant without suspended solid and
sediment, not blocking dosing equipment and piping, can be directly
used for wastewater treatment additive concentrate, no secondary
5. Efficient decolorizing flocculant flocculation body density,
easily soluble in water, less sludge.
6. Efficient decolorizing flocculant, cationic, nonionic, a very
short moment ions can be targeted for a wide variety of wastewater
Working principle of the flocculant flocculation precipitation is
made of inorganic flocculants, such as aluminum sulfate) and
organic ammonium anionic flocculant polypropylene acyl mixture in
aqueous solution to join wastewater (PAM), would produce compressed
double electric layer, make the waste water of suspended particles
in the loss of stability and colloidal particles condensed each
other make particles increases, formation of flocculation body,
alum flowers. After flocculation body length to a certain volume
under the action of gravity from the water phase precipitation, to
remove the large amounts of suspended solids in the wastewater, so
as to achieve the effect of water treatment. In order to improve
the separation effect, can be timely, right amount add coagulant
aid. Treated sewage water in such aspects as determinating
chromaticity, chromium, basically can achieve discharge standards,
can outside or used for artificial water injection oil production
back to the water injection.
Application of flocculant
1 municipal wastewater with isolated from urban sewage
flocculation, degradation of efficient to deal with sewage, the
mixed bacteria can make the sewage COD and BOD to in addition to
the rate of 100%. 1. 2 waste building materials building materials
processing wastewater of high suspended solids is also more
difficult to deal with waste water, such as ceramics factory
wastewater, sewage sludge mainly includes the body and glaze, two
kinds, the former mainly contain more clay particles, which in
addition to containing clay particles, there are quite a number of
the glaze. After 5 min, when adding NOC - 1 body turbidity of
wastewater from 1.4 down to 0.043; The glaze turbidity of
wastewater decreased from 17.2 to 0.35; Turbidity removal rate were
96.6% and 97.9% respectively, almost transparent supernatant fluid
can be obtained. With red flat aureus producing flocculant WaChang
wastewater treatment, after treatment of supernatant fluid was
almost transparent. Three other applications due to the water
treatment flocculant has characteristic of safe, non-toxic,
gradually used in the food waste water treatment, and achieved
satisfactory results. Method of use and the cost
1. The high-efficiency decolorizing flocculant available ones,
diluted with water or 10% ~ 50%, and then directly added to the
waste water, fully stirring alum flowers after a few minutes, will
be coloured nonferrous material from the water in the waste water
flocculation precipitation, with settlement or air float, realizes
2. The wastewater at high chroma and COD, can be highly efficient
decoloring flocculant used with inorganic flocculant to deal with,
but can not mix, this can reduce the processing cost, first or
after I add inorganic flocculant, should according to the
experiment and the treatment process. So that we can reduce the
processing cost, medicament into order and proportion should be
determined according to the actual.
3. Efficient decolorizing flocculant adding amount was 0.03 ~ 0.5
kg/T waste water (depending on the concentration of waste water),
colored wastewater treatment cost in general can be controlled in
0.25 ~ 1.5 yuan/T. General dosage of dyeing industry wastewater for
0.3/10000 ~ 0.8/10000 (depending on the concentration and variety).
Packaging and storage
Efficient decolorizing flocculant non inflammable, explosive,
non-toxic, harmless to the human body. Should be stored at room
temperature, sunlight in the hot sun. Storage period for a year and
Efficient decolorizing flocculant 50 kg plastic drum, liquid solid
25 kg plastic bag packing.
Pay attention to
Efficient decolorizing flocculant non-dangerous goods, splashed on
the hands, wash with water.