3.6x2.2m Horse stable Stall Fronts with swing doors or sliding door
As mentioned above, horses are gregarious animals and lack of
social contact to conspecifics both early and later in life may
cause development of different abnormal behaviours. Social contact
can be both direct and indirect. Direct contact is when horses are
able to touch each other over/through partitions or in paddocks or
in group housing (where horses have full contact with each other).
Indirect contact is when horses are able to see, smell and hear
other horses. Horses prefer direct contact in paddocks, on pasture
or in group housing.
It is recommended that horses, at least during a part of the day,
have contact to other horses in a paddock, pasture or in group
housing. This makes social grooming possible, and, especially for
young horses, allows for the development of other social
behavioural patterns, including learning to read the signals of
other horses. Horses should always be able to at least see other
The need for contact to conspecifics should be kept in mind when
designing accommodation for horses. Furthermore, any accommodation
should be dimensioned to fit the size of the horse so that it at
all times is able to lie down, rest and get up unimpeded, and stand
in its natural position. Although there are differences between
breeds, there is a fairly good correlation between the height at
the withers and total height and length of the horse. The length of
a horse standing in its natural position is approx. the height at
the withers multiplied by 1.5. The height of a horse standing in
its normal position is approx. the height at the withers multiplied
by 1.3. This may be used as a guideline when designing
accommodation for horses. However, it should be kept in mind that
more space is needed for a horse to turn around freely and for head
lifting. The accommodation should be constructed and maintained so
that there are no sharp edges or protrusions likely to cause injury
to the horses. Materials, with which horses may come into contact,
should not be harmful to the animals and should be capable to be
thoroughly cleaned and disinfected.
Windows in tie stalls, individual boxes and group housing systems
should be made of unbreakable glass or be protected by a grid or
the like to prevent the horse from breaking the glass and injure
itself. The laying area for horses should be provided with an
adequate amount of suitable bedding material, to ensure a dry and
comfortable resting area. Passageways should have a non-slip
surface and be wide enough to allow horses to pass each other
safely and without difficulty. Doors should be at least 1.2 meters
wide for horses and 1.1 meters wide for ponies. and they should be
sliding doors or open outwards. Doors to individual boxes or group
housing systems should be fitted with devises that fasten them both
on top and bottom. The indoor height should allow the horses to
stand in their natural position and carry out normal head
movements. As a guideline, the indoor height of any accommodation
should be at least the height of the withers plus 75 cm.
The product details :
|Name||3.6x2.2m Horse stable Stall Fronts with swing doors or sliding door|
10ft x 7ft ( 3m * 2.2m), 12ft x 7ft(3.6m * 2.2m) and 14ft x 7’ft(
any other sizes you like
|Material||Frame tube 2”x2” (50*50mm), strong U channel to take T&G boards|
|Finish||Powder Coated Finish or Hot Dip Galvanized Finish|
Full welds will make sure the stalls are strong and durable.
No sharp edges promise the people and horse safe.
Yoke door allows horses place his head outside.
Powder Coated Finish: We can PC any color you like. Say, Black
Color, Blue Color, Hunter Green color, etc.
Assembly easily: use heavy duty bolts or different way connector to