1U 19” Rack Mount MTP / MPO Cassette Patch Panel, LGX Modular
This 12 Fiber MTP / MPO cassette allows for a break-out to 12 LC
connectors. This cassette uses a flat polish MTP / MPO and LC/UPC
connectors for low insertion loss. Inside the cassette is a fan out
using Multimode OM1 62.5/125µm Corning fiber from one MTP/UPC
(female) which then connect to 12 LC/UPC ports on the front. This
cassette has a LGX foot print and can be installed in a Vertical
MPO cassette holder or a Horizontal MPO cassette holder.
Fibertronics MTP / MPO Cassettes are all made with high quality
Corning fiber optic cable and come in many various configurations.
These cassettes also have many common fiber optic connector ports
available. All Fibertronics MTP / MPO Cassettes can be made with
either male or female MTP / MPO connectors to fit your needs.
Fibertronics fiber optic MTP / MPO cassettes are an easy and low
cost no splice solution to transfer from multi-fiber cables to
fiber optic patch cables without the need of splicing. These MTP /
MPO Cassettes are ready to be utilized out of the box and easily
plug into Fibertronics Rack Mount Cassette Holders.
Features of MPO/MTP Cassettes
1. MTP/MPO Cassette Housing;
2. 12 LC (Duplex) port on front;
3. LGX pin spacing;
4. Corning Multimode 62.5/125µm MMF OM1 fiber.
Fiber Transmission Performance
|Fiber Transmission Performance|
|Maximum Attenuation (dB/km)||3.4/1.0||3.0/1.0||3.0/1.0||3.0/1.0||0.4/0.4/0.3*|
|Maximum Attenuation (dB/km)||3.4/1.0||3.0/1.0||3.0/1.0||3.0/1.0||0.65/0.65/0.5**|
|Minimum Over Filled Launch (OFL) Bandwidth (MHx•km)||200/500||700/500||1500/500||1500/500||/|
Minimum Effective Modal
|220 / -||950 / -||2000 / -||5350 / -||/|
|Characteristic||Multimode (at 850/1300nm)||Single-mode (at 1310/1550nm)|
|MTP®/MPO Connector Insertion Loss||Typical 0.50 dB||Maximum 0.75 dB||Typical 0.45 dB||Max 0.55dB|
|MTP®/MPO Connector Reflectance||< 25 dB||< 35dB (8o angled polish)|
|Durability||500 Rematings: < 0.50dB change||500 Rematings: < 0.45 dB change|
|Operating Temperature1||Outdoor cable -40℃ to +70℃; Indoor cable 0℃ to +70℃|
Length as defined in P/N, XX meters.
Tolerance: < 5.0 meters +5/-0 cm; ≥ 5.0 meters +20/-0 cm
Loose tube cables include a transition at one or both ends that is
included in overall length.
|1 Contact customer service representative to discuss exceptional
(1) 19’’rack mount, the panel and modules are made of cold rolled
(2) Module comes up to 24 LC or 12 SC adapter ports and switch to
(3) 1U patch panel capacity come up to 72F fully loaded with 3
(4) Factory pre- terminated module, plug and play on site, no need
fiber splicing and cable wiring which saves labor cost.