NOTE:
This item is sensitive for static,please keep in mind that DO NOT
touch this item unless you Wear anti-static wrist strap when
working with the laser.
Notice:
1 . This laser diode may do harm to human eyes, when the laser tube
is working, pay no direct attention to it.
2, The laser tube requires a suitable power supply, transient
reverse current can`t exceed 32mA, reverse voltage can`t exceed
4.7V, otherwise it will damage the laser tube.
Test the laser tube: insert or pull out the laser tube after the
power off. Do not plug or unplug the laser tube when the power on,
otherwise the laser tube will be damaged, invalid.
3, The laser tube should be kept or working in a dry environment to
prevent condensation, condensation may damage the laser tube.
4, At high temperatures, it will increase the threshold current,
lower the efficiency and accelerate the aging of the laser tube.
5,When the output power higher than the specified parameters, it
will accelerate the aging of the laser tube.
6, The laser tube need to be used in fully heat or cooling
conditions
7, Laser diodes are ESD sensitive device, anti-static measures
should be prepared. Before pick up the case, make sure you get a
good grounding condition, otherwise the laser tube will be easily
to breakdown by the static electricity, resulting in the laser tube
failure. Wear anti-static wrist strap when working with the laser.