Categories | CO Gas Sensor |
---|---|
Brand Name: | Mixsen |
Model Number: | MIX8015 |
Place of Origin: | Zhengzhou,China |
MOQ: | 1 |
Supply Ability: | 10,000/day |
Delivery Time: | within 3 working days after payment |
Packaging Details: | Inner packaging: foam cushion Outer packaging: carton |
principle: | Electrochemical |
range: | 0~1000ppm |
target gas: | CO/Carbon Monoxide |
Lifetime: | 8 years |
Resolution: | 0.5 ppm |
Response Time: | < 60 seconds |
Principle Introduction:
When carbon monoxide diffuses to the surface of the working electrode through the porous film on the shell, it oxidizes on the working electrode under the catalysis of the working electrode. When the gas sensor produces an output current, its magnitude is proportional to the concentration of the gas. The concentration of carbon monoxide can be detected by measuring the output current of the sensor with an external circuit through the electrode lead line, and has a wide linear measurement range. In this way, the signal acquisition circuit and the corresponding conversion and output circuit are connected to the gas sensor to realize the detection and monitoring of carbon monoxide gas.
Feature:
High accuracy
Linear output
Long life time
Environmentally friendly design
High selectivity and sensitivity to CO
Strong anti-interference ability
Application:
Residential and commercial
Indoor underground parking
Houseboat and moto home
Fire detection
Ventilation control
Domestic generator
Industrial Carbon monoxide gas monitors/alarm/detectors
Technical Parameters :
Item | Specification |
Target Gas | Carbon monoxide/CO gas |
Measurement Range | 0 ~ 1000 ppm |
Maximum Overload | 2000 ppm |
Output Current | 1.5-3.5 nA/ppm |
Repeatability | ±2% |
Resolution | 0.5 ppm |
Response Time(T90) | < 60 seconds |
Long Term Output Drift | < 2% /month |
Life time | 8 years |
Operating Temperature Range | -20 ~ 50˚c |
Operating Humidity Range | 15 ~ 90% RH |
Operating Pressure Range | 0.1mpa±10% |
Recommended Load Resistor | 1kΩ |
Bias Voltage | Not required |
Operating Note:
* When soldering the metal ribbons, the soldering tin was forbidden
to contact with the sensor.
* Aging the sensor no less than 30 mins before operation;
* Keeping the sensor out of the volatile solvent.
* Prohibit storage and operating the sensor in acidic or alkaline
environment.