Circular Steel Thin plate Thin Kerf Saw Blades Circlar Convex Plate Saw Blade 205mm
...Kerf Saw Blades Circlar Convex Plate Saw Blade 205mm Specification: 205x1.0x0.8/1.6x80P Using SKS japan steel (imported), tips from ceratizit(imported) and grinded by ENOKIDA machine(imported from japan) and vollmer (imported from Germany) With the unique stress technics and plate cooling design, we can insure the thin blade......
HangZhou Hirono Tools Co.,Ltd
|
10 Inch 100 Tooth Tungsten Carbide Tipped Circular Saw Blade For Metal
...: Makes Smooth, Razor-Sharp Finish Cuts in non-ferrous metal, Produces Smooth, Quiet Cuts with Laser-Cut Kerf, heat expansion slots allow blade to expand due to heat build-up keeping the...
DANYANG RIGHTOOLS CO.,LTD
|
Thin Kerf TCT Circular Saw Blades 350mm Wood Saw Blade General Purpose
Thin-Kerf Alternate Top Bevel Tooth General Purpose Saw Blades For Rip Wood(13 Series) Technical Information 1. Pre-hardened and pre-flattened cold-rolled steel. 2. Hi-performance laser cut with anti-vibration technology. 3. 100% Tension & Balance control......
Betop Industrial Tools
|
Aluminum Cutting TCT Saw Blade / Circular Saw Blade 250mm To 500mm
...Blade for Aluminum Cutting , Aluminum Cutting Blade TCT circular saw blade for aluminum cutting. Outer diameter: 250-500mm Center hole: 20mm, 22.23mm, 25.4mm, 50mm or 60mm Application: For cutting aluminum, and also can be used to cut plastic steel. Advantage: Providing a high degree of finishing edge Automatic Brazing & Automatic Grinding Teeth Details Spec.: TCT saw blade for Aluminum Item No. Diameter(mm) Kerf...
Johnson Tools Manufactory Co.,Ltd
|
Customized Industrial Grade TCT Circular Saw Blade For Crosscutting Solid Wood
...Blade For Crosscutting Solid Wood Remark: All size can be customized Adventages: Clean and Smooth Cuts Accurate Cuts The combination of the tooth configuration and geometry allows for greater control and reduces the likelihood of the blade wandering off the desired cutting line. Reduced Material Waste: Blades with a thin kerf remove less material during the cutting process. Extended Blade......
Foshan Nanhai Yongtai Saw Co., Ltd
|
4in 110mm TCT Saw Blade Circular Saw Blade For Aluminum
Ordinary Circular Saw Blades for Aluminum 外径(D) Diameter 基体厚度Body Thickness (mm) 切宽Kerf (mm) 孔 径 (d) Hole Diameter (mm) 齿数 (Z) Teeth Inch Metric(mm) 4" 110 1.2 1.8 20 40T 5" 125 1.2 1.8 20 40T 6" 150 1.3 2.0 20/25.4 60T 7" 180 1.3 2.2 20/25.4 60T 7" 180......
Wuxi Byriver Technology Co., Ltd.
|
Thin Kerf TCT Saw Blade Ideal for Wood
...blade, suitable for use on table saws, sliding Table saws, Radial arms, and miter saws of all types, leaves a super-smooth finish When cutting hard or softwood. It is especially suited to trimming and sizing veneers and laminates, in single sheets or in stacks. Product : Item Character Name TCT thin kerf saw blade Key words Circular saw blade,saw blade for wood, thin kerf Category TCT saw blade......
Chengdu Fengke Precision Tool Co., Ltd.
|
MJ1000 band saw horizontal wood cutting sawmill aserradero portatil, portable swing blade sawmill
...Finished with Carbide band saw blade for hard wood cutting . The sawing kerf is small, reduce the waste to high output. The computerized sawmill is sutiable for cutting expensive wood in the furniture factory and move around to cut wood in ......
Weifang Jiuyi Information technology co., LTD
|
blade for table saw with thin kerf wood ripping cut diameter from 140mm up to 600mm w punched expansion slot
blade for table saw with thin kerf wood ripping cut diameter from 140mm up to 600mm w punched expansion slot with or without anti-kickback & laser cut expansion slot For multi ripping cut softwood, hardwood, occasional crosscut, also for cutting plywood and chipboard. Thin kerf......
MBS Hardware Co. Ltd
|
PCB board cutter blades are suitable for Accuscore, Anita, Avalon, Filotec, Loehr&Herrmann and Telmec, Banaby and Mania-
...blades are suitable for Accuscore, Anita, Avalon, Filotec, Loehr&Herrmann and Telmec, Banaby and Mania-testerion(JWA) machine. Carbide Blades for Accuscore: Diameter Kerf Bore Z Tooth Style 101.6mm (4") 2.0mm 25.4mm (1") 100 90/60/45/30/20degree Diamond Blades for Accuscore: Diameter Kerf Bore Z Tooth Style 101.6mm (4") 2.0mm 25.4mm (1") 24 60/45/30 degree Carbide Blades for Anita: Diameter Kerf......
Shenzhen Oyea Machinery Co., Ltd.
|