lifting force test mpi calibration block

Brand Name:HUATEC

Model Number:45N

Place of Origin:China

... Block, It is used to verify the lifting force of the horseshoe probe. There is a work-related injury on the surface. It is used for magnetic particle inspection inspection and testing to effectively check the lifting force of the inspection instrument and

Brand Name:Huatec

Model Number:dead weight test block

Place of Origin:China

...Block Lifting Force Test Mpi Calibration Block Detailed description: I. Introduction and requirements of N1 45N magnetic particle lifting force test block: 1.N1 type 45N magnetic particle lifting force refers to the magnetic yoke of portable magnetic particle testing machine at the maximum magnetic pole spacing, the attraction to ferromagnetic materials. 2. The lifting force...

Brand Name:TMTECK

Model Number:IIW Type 2

Place of Origin:China

...International Welding Institute, ASTM E164 and U.S. Air Force NDI Manual T.O. 33B-1-1 Includes a 2.0" x-ray .250" deep cut overlay on 4.0" radius for distance calibration. Also Includes Numbers 3, 5 and 8 through holes (3/64", 5/64" E 8/64" diameter) for

Brand Name:Shuanghai

Model Number:HSH-CB1.5

Place of Origin:Chungking/Chongqing, China

Product: 1.5 Ton/ 1500kg Lever Hoist HSH-C Model 60 YEARS' FACTORY FACTORY PRICES WHOLESALE MOQ:50pcs Product Description: Lever Chain Hoist or Rathet Chain Hoist is one type of hoist lifting or tightening hand tools in construction and electricity ...

Brand Name:RAYTECH

Model Number:RCDX-220

Place of Origin:China

... to be wound directly on the probe to generate an induced magnetic field to magnetize the workpiece. The device has small size, light weight, large lifting force and

Brand Name:SAMYON

Model Number:YAW

Place of Origin:CN

...Testing Machine/Jack Testing Machine Application: It is used to test the mechanical properties of jacks, such as force value error, load efficiency, internal leakage, interpolation error, calibration equation, etc. Standard: JJG 621 -2012 Hydraulic jacks Parameters: Max test force 3MN -30MN (can be customized) Max lifting force of guide rail 20KN – 100KN Test adjustment space 0-2200mm(customizable) Max test...

Brand Name:GALAXY

Model Number:GXHSH-3A

Place of Origin:China

..., towing, lowered and calibrated by hand. Hand lever hoist is mainly used to tighten power and overhead lines and other cable lines, traction, moving equipment and other heavy ...

Brand Name:Cartesykj

Model Number:CTFZ-3A

Place of Origin:China

...lift for car 4000kg vehicle test line car annual inspection equipment Product Introduction: Its main for the brake performance testing. The roller brake tester can detect and calculation the each axis (left and right wheels) block force of car, brake force and the deviation of brake force (process deviation, and maximum deviation), as well as the ratio of brake force...

Brand Name:BOTO

Model Number:YES-2000

Place of Origin:CHINA

...Block Hydraulic Cube Compressive Strength Testing Machine 1. Compression testing machine features 1. This machine has high precision, stable and convenient performance, and reasonable structure 2. Wide and arbitrary test space for adjustment table, manual adjustment screw lifting 3. Adjustable lift 4. Labor-saving operation, high work efficiency 2. Technical Parameters Model BT-2000 Max force...

Brand Name:JCYC

Model Number:VK

Place of Origin:CHINA

...Lift Height(m) Running test load(T) Headroom (mm) No.of load chain fall Hand-pull lift force(N) Chain Dia(mm) Net weight (kg) VK0.25T 250 1 3.75 215 1 125 4*12 0.35 VK0.5T 500 1.5 7.5 255 1 180 5*15 0.55 Product description Lever block is a universal, manual hoist for lifting, tensioning and lashing in any direction. The ratchet lever block