20Ah LiFePO4 Electric Bike Battery Pack 48V Electric Car Batteries High Power

No.	Item	General Parameter	Remark
1	Rated Capacity	20Ah	Standard discharge(0.2 C5)after standard charge(0.2 C5)
2	Minimal Rated Capacity	18Ah	Standard discharge(0.2 C5)after standard charge(0.2 C5)
3	Nominal Voltage	48V	16S
4	Cycle Life	Higher than 60% of the Initial Capacity of the Cells	Charge: CC@0.2C to 58.4V, then CV till current to 0.05C Rest: 30min. Discharge: 0.2C to 36.8V Temperature:20±5℃ Carry out 2000cycles
5	Discharge cut-off voltage	36.8V	36.8V( recommended)
6	Charging cut-off voltage	58.4V	58.4V (recommended)
7	Cell and assembly method	IFR26650EC-5.0AH	16S12P
8	Housing material	PVC
9	Standard charge	0.2C constant current(CC) charge to 58.4V,then constant voltage (CV)58.4V charge till charge current decline to ≤0.05C	Charge time : Approx 7h
10	Standard discharge	Constant current 0.2C Cut-off voltage 36.8V
11	Maximum Charge Current	15A
12	Max Discharge Current	40A
13	Operation Temperature Range	Charge: 0~45℃	60±25%R.H.
		Discharge: -10~60℃
14	Storage Temperature Range	Less than 1 year : 0~25℃	60±25%R.H. at the shipment state
		Less than 3 months:-5~36.8℃
15	Weight	Approx: 8.8Kg
16	Max. Dimension	Height:280mm
		Width: 164mm
		Length: 130mm

Packing Detail

High Capacity Electric Bike Battery Pack 48v 20ah For Electric Vehicle

We support OEM service for customer about the label

High Capacity Electric Bike Battery Pack 48v 20ah For Electric Vehicle

No.	Items	Test Method and Condition	Criteria
1	Vibration test	After standard charging, fixed the cell to vibration table and subjected to vibration cycling that the frequency is to be varied at the rate of 1Hz per minute between 10Hz and 55Hz, the excursion of the vibration is 1.6mm. The cell shall be vibrated for 30 minutes per axis of x, y axes.	No leakage No fire No explosion
2	Drop test	The battery to be fully charged with standard charging condition, and dropped from a height of 1m to concrete floor for 6 times (+/- direction on x, y axes).	No leakage No fire No explosion
3	Impact test	The battery to be fully charged with standard charging condition, and put a rod with diameter = 15.8mm on the cell, and then heavy block (weight = 9.1Kg) crash on the cell from a certain height (height = 61.0cm).	No explosion No fire
4	Crush test	Cell is to be crushed between two flat surfaces, the crushing is to be continued until applied force of 13 kN, and once the maximum force has been obtained it is to be released. Measure its temperature and observe event.	No explosion No fire
5	Shock test	The battery to be fully charged with standard charging condition, and subjected to 6 shocks/axis, 18 total, of peak acceleration of 150g and pulse duration of 6 ms.	No explosion No fire No leakage

Product Tags:

electric bicycle battery

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Guang Zhou Sunland New Energy Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!