Product Details
Company Profile

30Ton Double Drum Electric Wire Rope Winch Machine With Spooling Device

Electric Steel Cable Double drums Winch with spooling device

Product Equipment

Our factory has more than 2000 sets of advanced equipment such as casting, forging, gear processing, sheet metal stamping, riveting, heat treatment and mechanical processing. In recent years, the Germany CW1000 machining center, CNC four axis, five axis linkage machining center, CNC punch, large CNC hobbing gear grinding machine, large CNC floor boring and milling machine,Vacuum electron beam welding, CNC welding robot and 80 roll machine and other advanced processing equipment.

Technical Parameters

No:	Wire diameter(mm)	Pulling Force(KN)	Rotation Direction	Drum Diameter(mm)	Drum Length(mm)
1	3~8	3~10	Lefthand,Righthand	>160	<1000
2	10~16	12~20	Lefthand,Righthand	>320	<1000
3	18~24	20~80	Lefthand,Righthand	>480	<1000
4	26~32	100~120	Lefthand,Righthand	>640	<1000
5	34~40	150~200	Lefthand,Righthand	>800	<1000
6	42~50	240~400	Lefthand,Righthand	>1000	<1000

Winch With Spooling DeviceOverview

Product name	Cable winch drum
Drum Quantity	Single Or Double
Drum Design	LBS Groove Or Spiral Groove
Material	Carbon Stainless And Alloy Steels
Size	Customization
Application Range	Construction Mining Terminal operation
Power Source	Electric and hydraulic
Rope Capacity	100~300M

Product Features:

1. Steel Wire rope electric winch with spooling system

2. Automatic rope arrangement can be realized

3. Compact structure and reasonable design

4. Keep the wire rope's tensioning tight for winches & cranes

5. The spooling machine can supply a back force on the rope to keep the rope a tensioning force.The spooling machine and its HPU are removeable

Spooling device:

1. The rope winding device of the winch (spooling device winch) adopts the principle of double rotating screw to drive the rope wheel to move back and forth,It is mechanical transmission device, easy to use, safe and reliable.

2. The winch rope arranging device consists of six parts, namely, power output part, transmission box, clutch, spiral sleeve part, rope supporting part and base.

3. In the installation process, does not require any part of the transformation of the winch, only needs to install the outer gear on the winch motor side, the power of the motor output.

Drive principle:

Winch drum - gear box - screw sleeve rotation - rope wheel reciprocating movement.

Spooling concept

Spooling device is an important part of cable storage winch. The guide cables are arranged orderly on the drum of cable storage winch. It is mainly composed of screw, rope retractor and load-bearing beam. The screw of the cable drum and the cable setter rotates synchronously through the chain drive device. The screw is bi-directional thread and the lead is the diameter of the cable. The rope retractor consists of a small roller, a pulley baffle, a pulley and a slider nut, mounted on the bearing beam by a small roller. The rotation of the bi-directional screw causes the slider nut to move left and right along the axis of the screw with the retractor to guide the cable. In order to avoid bending deformation of the screw under excessive pressure, the load-bearing beam was analyzed by force and finite element method, and its strength and stiffness were calculated to meet the requirements.

Structure form

The winch converts the electric energy into mechanical energy through the motor, that is, the rotor of the motor rotates the output, through the triangle belt, shaft, gear, and then drives the drum to rotate after deceleration. The reel winds the wire rope 7 and passes through the pulley block to make the crane hook lift or drop the load Q, change the mechanical energy into mechanical work, and complete the vertical transport loading and unloading work of the load

Company introduction

Our company early introduction of advanced technology at home and abroad, after years of research and development and improvement, in the hoisting machinery multi-layer wire rope row rope field has made a major breakthrough,

In 2010, the company obtained the production patent of double folding rope groove drum, and founded its own brand - LBS. At present, the company has formed a mature and stable, serializedproduct production mode.

Product Tags:


*From:	Your email address is incorrect!
*To:	Hebei Junke Machinery Technology Co.,Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Winch With Spooling Device
Brand Name:	LBS
Model Number:	Custom-Made
Certification:	CCS
Place of Origin:	China
MOQ:	1 Piece
Price:	USD, EUR, RMB / Negotiable
Payment Terms:	L/C, T/T, Western Union
Supply Ability:	10 Pieces Per Month
Delivery Time:	General order 30-50 days
Packaging Details:	Steel Pallet
Product name:	Winch With Spooling Device
Capacity:	30Ton
Application:	Ship
Power source:	Electric Or Hydraulic
Material:	Steel Q355D