Product Details
Company Profile

Liquid Containers Rust Proof H32 3003 Aluminium Sheet

3003 Anodized H 111 H 116 H 14 H 24 H 32 Aluminium Alloy Sheet For Liquid Containers

Product Description

After anodizing, the surface of the aluminum can produce a few microns-hundreds of microns of oxide film. Compared with the natural oxide film of aluminum alloy, its corrosion resistance, wear resistance and decorative properties have been significantly improved and improved. In fact, the direct current sulfuric acid anodic oxidation method is the most common application, because it is suitable for aluminum and most Anodizing of aluminum alloy; thicker film, hard and wear-resistant, better corrosion resistance after sealing; film colorless and transparent, strong adsorption capacity, easy to color; lower processing voltage, less power consumption ; The treatment process does not need to change the voltage cycle, which is conducive to continuous production and practical operation automation

3003 aluminum alloy is AL-Mn series alloy, which is the most widely used rust-proof aluminum. The strength of this alloy is not high (slightly higher than that of industrial pure aluminum) and cannot be strengthened by heat treatment. Therefore, cold working method is used to improve its mechanics Performance: It has a high plasticity in the annealed state, the plasticity is still good in the semi-cold work hardening, the plasticity is low in the cold work hardening, good corrosion resistance, and good weldability. Mainly used for low load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricant pipes, various liquid containers, and other small load parts made of deep drawing, wire Used to make rivets.

Chemical Composition

ALLOY	CHEMICAL COMPOSITION (%)
ALLOY	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Zr	Other		Al
3003	0.6	0.7	0.05-0.2	1.0-1.5				0.1			0.05	0.15	rest
3004	0.3	0.7	0.25	1.0-1.5	0.8-1.3	__	__	0.25	__	__	0.05	0.15	rest
3104	0.6	0.8	0.05-0.25	0.8-1.4	0.8-1.3	__	__	0.25	0.1	__	0.05	0.15	rest
3105	0.6	0.7	0.3	0.3-0.8	0.2-0.8	0.2	__	0.4	0.1	__	0.05	0.15	rest
5052	0.25	0.4	0.1	0.1	2.2-2.8	0.15-0.35	__	0.1	__	__	0.05	0.15	rest
5A06	≤0.40	0.000～0.400	≤0.10	0.50～0.8	5.8～6.8	__	0.0001～0.005	≤0.20	0.02～0.10	__	0.05	0.1	rest
5005	0.3	0.7	0.2	0.2	0.5-1.1	0.1	__	0.25	__	__	0.05	0.15	rest
5050	0.4	0.7	0.2	0.1	1.1-1.8	0.1	__	0.25	__	__	0.05	0.15	rest
5154	0.25	0.4	0.1	0.1	3.1-3.9	0.15-0.35		0.25	0.2		0.05	0.15	rest
5754	0.4	0.4	0.1	0.5	2.6-3.6	0.3	__	0.2	0.15	__	0.05	0.15	rest
5454	0.25	0.4	0.1	0.5-1.0	2.4-3.0	0.05-0.2		0.25	0.2		0.05	0.15	rest
5182	0.2	0.35	0.15	0.2-0.5	4.0-5.0	0.1		0.25	0.1		0.05	0.15	rest
5083	0.4	0.4	0.1	0.4-1.0	4.0-4.9	0.05-0.25	_	0.25	0.15	__	0.05	0.15	rest
5086	0.4	0.5	0.1	0.2-0.7	3.5-4.5	0.05-0.25		0.25	0.15		0.05	0.15	rest
6060	0.3-0.6	0.1-0.3	0.1	0.1	0.35-0.6	0.05		0.15	0.1		0.05	0.15	rest
6061	0.4-0.8	0.7	0.15-0.4	0.15	0.8-1.2	0.04-0.35	__	0.25	0.15	__	0.05	0.15	rest
6063	0.2-0.6	0.35	0.1	0.1	0.45-0.9	0.1	__	0.1	0.1	__	0.05	0.15	rest

Mechanical properties:

Alloy	Temper	Thickness(mm)	Tensile strength(Mpa)	Yeild strength(Mpa)	Elongation(%)
			Min
3003	O H111	>0. 20—0. 50	95-135	35	15
		>0. 50 — 1. 50			17
		>1. 50 — 3. 00			20
		>3.00 — 6. 00			23
		>6.0-12.5			24
		>12.5-50
	H12	>0. 20—0. 50	120-160	90	3
		>0. 50 — 1. 50			4
		>1.50 — 3.00			5
		>3. 00 — 6. 00			6
	H14	>0. 20 — 0. 50	145-195	125	2
		>0. 5- 50			2
		>1. 50 — 3. 00			3
		>3. 00—6.0			4
	H16	>0. 20 — 0. 50	170-210	140	2
		>0.50 — 1.50			3
		>1. 50—4. 00			3
	H18	>0. 20 — 0. 50	190	170	1
		>0. 50—1. 50			2
		>1. 50 — 3. 00			2
	H22	>0. 20—0. 50	120-160	80	6
		>0. 50 — 1.50			7
		>1.50 — 3.00			8
		>3. 0—6.0			9
	H24	>0. 20—0. 50	145-195	115	4
		>0. 50 — 1.50			4
		>1.50 —3. 00			5
	H26	>0. 20 — 0. 50	170-210	140	2
		>0.50—1.50			3
		>1.50 — 3. 00			3
	H28	>0,20 — 0,50	190	160	2
		>0. 50〜L 50			2
		>1. 50—3. 00			3

Aluminium Material Grade

1)1000series aluminium /Pure Aluminum/Pure Aluminium:1050,1060,1070,1080,1100,1350,etc

2)2000series aluminium alloy/Hard Aluminum/Hard Aluminium/Aluminum-Copper Alloy/ Aluminium-Copper Alloy:2011,2014,2017,2024,etc

3)3000series aluminium alloy/ Rust-Proof Aluminum/Rust-Proof Aluminium/ Aluminum-Manganese Alloy:3002,3003,3104,3204,3030,etc

4)5000series aluminium alloy/ Rust-Proof Aluminum/Rust-Proof Aluminium /Aluminum-Magnesium Alloy:5005,5025,5052,5040,5054,5056,5083,5152,etc

5)6000series aluminium alloy / Aluminum-Magnesium-Silicon Alloy /Aluminium-Magnesium-Silicon Alloy /:6101,6003,6061,6063,6020,6201,6262,6082,etc

6)7000series aluminium alloy/ Aluminum-Zinc Alloy/ Aluminium-Zinc Alloy:7003,7005,7050,7075,etc

7)8000series aluminium alloy:8011,etc

Product Photo

Company Introduction

Equipment Production Parameters By Chongqing Dongchong Aluminum Co.,Ltd
1650mm Slitting machine	Uncoil(MM)				Finished size(MM)		Slitting Width(MM)
	ID	OD	Width	Thickness	ID	OD	Above 0.5mm≥ 20mm
	Φ 400	≤ 1800	≤ 1600	0.5-4.5	Φ 400	≤ 1700(normal)
	Φ 500				Φ500(normal)
	Φ 600
Aluminum foil Slitting machine	Uncoil(mm)				Finished size(MM)
	ID	OD	Width	Thickness	ID	OD	Width
	Φ 76	≤ 550	≤ 1200	0.08-0.12	Φ76Φ76	≤ 550(normal)
1450mm Crosscutting machine	Uncoil(MM)				Finished size(MM)
	ID	OD	Width	Thickness	ID	OD	Width
	Φ 505	≤ 1780	≤ 600	0.1-1.5	Φ150 Φ300 Φ400 Φ500	≤ 1700(normal)	6-600
	Φ 605
Annealling Furnace	Furnace Temperature		Furnace Size
	≤440°C		320020002100
Saw Cutting	Thickness(mm)		Width (mm)			Length (mm)

Product Tags:


*From:	Your email address is incorrect!
*To:	Chongqing Dongchong Aluminum Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Aluminium Alloy Sheet
Brand Name:	Dongchong
Model Number:	3003
Certification:	ISO9001
Place of Origin:	Chongqing,Dongchong
MOQ:	500-5000KG for different product
Price:	negotiable
Payment Terms:	L/C, T/T
Supply Ability:	10000tons per month
Delivery Time:	5-20 Days
Packaging Details:	Wooden pallet , Wooden Box
Alloy:	3003
Temper:	H 111, H 116, H 14, H 24, H 32
Color:	Gold, silver, rose gold, champagne or customized
Usage:	liquid containers
Sample:	free
Protection:	Film on one side or both side , paper interleave