Hollow flange torque sensor 3000NM 2000NM 1000NM 500NM 300NM 200NM 100NM

Hollow flange torque sensor 3000NM 2000NM 1000NM 500NM 300NM 200NM 100NM

Hollow flange reaction type torque transducer FTN is made of alloy steel based on strain gauge technology.A wheatstone full bridge is bonded on a special-machined elastic body to deliver mV/V output with maximum 0.25% non-linearity over a wide dynamic range.Reaction torque sensor FTN offers 0-100NM / 0-200NM / 0-300NM / 0-500NM / 0-1000NM / 0-2000NM / 0-3000NM seven measuring ranges to choose from.Flange to flange mounting with a 60mm hole goes through the center of the transducer which makes FTN applicable for both non-rotating and rotating torque measurement. Typical applications of torque meter FTN are for example servo motor torque measurement, test bench applications, fatigue testing, tightening torque control, twist measurement, motor dynamometers, actuator test and so on.

Dimensions

Parameters

A torque sensor is a transducer that converts mechanical torque into mV signal proportional to the applied torque.The acting torsion causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply, the output signal between Sig+ and Sig- will change proportionally,thus the moment can be measured by measuring the output signal from the transducer.The output range of FTN is normally within -20mV...+20mV, signal amplification may be required for most applications, a signal conditioner can be used to get -5~5V, 0-10V or 4-20mA output for easy data processing.

Located in China,Forsentek Co., Limited has provided load cells,force sensors and measuring solutions to more than 30 countries all over the world.

At Forsentek,you can find universal products like:

• Compression load cell
• Force sensor force transducer
• Button load cell
• Micro load cell
• Strain gauge load cell
• Reaction torque sensor
• Rotary torque sensor

Forsentek is also an expert in customized force measurement products like:

Load pins for overload protection.

Bolt sensor for fastening force monitoring.

With experienced engineers in load cell and force sensor application field,Forsentek knows exactly what you need after you talk to us.Being expert in strain gauge based load cell manafuacturing technology and custom-made service,we are confident in providing the most suiablt products to meet your application perfectly.

Send us an inquiry,we'll get back with solutions.