0.06Mm Foil Aluminum Honeycomb Grid Core Of Small Cell

0.06 mm Thick Foil Aluminum Honeycomb Core of Small Cell is made of chromate-free treated aluminum foil of 0.06 mm thick bonded by special purpose adhesive with a cell side length 1.87 mm. It is used for high strength composite panel. The performance of the aluminum honeycomb core is determined by the properties of aluminum foil, special purpose chemical adhesive and the size and configuration of the core.

Because of the train travells at a really high speed so the core should maintain a high strength. The spot welding or laser welding should be applied to the bonding technology if specially required.

Process

General process of an aluminum honeycomb core initiated with an aluminum foil roll and surely the foil is specially treated.

The adhesive tapes are printed to the foil surface with the intervals and width pre-determined by the cell size and strength requirement.

The foil paper is cut into required size to be piled up on the stacking table with equipment and man supervision on the adhesive tape positioning.

These stacked loose blocks should be pressed in a heated press to cure the adhesive so that the sheets of foil are bonded together to hardened block.

The aluminum honeycomb block can be cut into slices with the height of the slices tailored to customized requirements.

Finally, no matter it is done in supplier’s plant or at client’s workshop, the honeycomb should be expanded before forming aluminum honeycomb panel.

The following materials are for forming honeycomb cores:

1. Aluminum foil

Regularly, 3003H19/5052H18 aluminum alloy foils after strict surface treatment are used for producing aluminum honeycomb core.

2. Special Purpose Chemical Adhesive

Modified epoxy glue for high temperature cure process can provide not only sufficient bonding strength, but also environmental resistance and high or low temperature resistant properties. The joint strength of aluminum honeycomb core is the keypoint of evaluating the core’s performance. The minimum requirement should be more than 2.0N/mm.

Specification of Aluminum Honeycomb Core:

Specifications can be customized according to customer’s requirement.

Supply modes of Aluminum Honeycomb Core:

- Unexpanded block

- Unexpanded slice

- Expanded sheet

- Pieces cut to size

Pasia Industries is a scientific and technological enterprise specializing in researching, developing, producing, installing and providing technical consultation and service for mineral insulated heating cables, heating elements and finished heaters as well as welded honeycomb products for filtering, shielding, sealing and guiding. Located in Puyuan high-tech park, Zhejiang province, it covers an area of more than 10 hectares, with a construction area of more than 50,000 square meters. It possesses a convenient transportation, about 150 kilometers from Shanghai in the north and 40 minutes from Hangzhou Xiaoshan international airport in the south.

With the most professional production lines and the highest automation level in China, Pasia produces mineral insulated heating cables, heating elements and finished heaters, honeycomb cores of stainless steel, brass, nickel, aluminium and other metal or metal alloys according to international standards. Pasia is one of the top four professional manufacturers of industry in the world on capacity and sales. As leading technological products, they possesses advanced properties of good quality, many varieties, full specification range, wide application, long service life, good safety and easy maintenance etc., and have been successfully applied to oil and gas (extraction, transportation, storage, etc.), chemical industry （petrochemical industry, fine chemical, pharmaceutical, etc.), power (nuclear power, solar power, etc.), construction (melting ice and snow), railway, aviation, metallurgy, electronic and et al for the applications as heat tracing and heating, detecting, signaling, power transmission, as well filtering, shielding, guiding and sealing. The company has become one manufacturer of the few in the world of completely electric heating technology and products of four categories including constant wattage, temperature self-regulating, MI heating cable and skin effect resistance and one of the top three wire electric heating products suppliers. The honeycomb core has been widely used by many clients on filtering, water treatment, structure platform with high requirement on flatness, shielding, turbine sealing and straightening etc. It can not only provide complete categories of professional products, also provides customers with solutions, consulting, project reply, EPC project general contracting services which can even be extended to the services including safe operation for maintenance etc. So far, the company has possessed 25 related patented technologies, 13 national new products, and 12 national technological innovation projects.

Upholding a company spirit of leading innovation and win-win cooperation, Pasia has become one of the few in the industry who possesses complete capacity of research and development, design, production and installation of mineral insulated heating cable and its heating equipment, honeycomb core and its parts or modules both home and abroad, relying on professional team, advanced management means, close work with related universities, design institutes and scientific research units, industry leading R&D testing capacity, under the ISO9001 quality system. After several years’ hard and persistent efforts, Pasia have the ability to supply a complete set of products, excellent technical support and perfect follow-up service. A variety of products have not only been applied to meet the requirements from domestic market, but also exported to many countries and regions such as Europe, Asia, Africa and America to serve different categories of purposes. It receives a high visibility and reputation from the industry. Over the past years, the company has involved in thousands of projects from all walks of life, among which the most influential ones are:the explosion-proof natural gas electric heater at Datong natural gas gate station in Shanxi province; Electric heater for paint material for the production bases of Hempel (USA) paint company in Kunshan and Guangzhou; Electric heaters for Tongyi chemical system in Beijing, Lanzhou, Shanghai and Shandong; Complete heating and tracing equipment for large oil and gas fields in Jiangsu oilfield, Benin, Angola, Thailand, Myanmar, Kazakhstan, the UK, Canada; the wind or water tunnels of honeycomb core in Singapore, India, USA and UK, shielding honeycomb core applications from many foreign countries, honeycomb seals for the turbines from Russia etc.

Insists on serving market with sincerity, securing quality with technology, leading innovation with study and driving development with passion, Pasia has become a well-known provider of advanced heating technology solutions at home and abroad, and one of the fastest growing members in the industry.